Reflective Tape, REF-DOT-C2-50 yd on Tapes & Technical Solutions LLC

Tapes & Technical Solutions LLC - Reflective Tape, REF-DOT-C2-50 yd

1105 Tuckahoe Drive
Nashville, TN 37207
Phone: 615-244-7554
Fax: 615-244-2974


All Categories > Aisle Marking Tapes > Conspicuity Tape > Reflective Tape, REF-DOT-C2-50 yd > View Items


	Reflective Tape, REF-DOT-C2-50 yd
	Check up to five results to perform an action.

	larger image		Reflexite® conspicuity material is composed of cube corner (microprism) retroreflective elements integrally bonded to a flexible, smooth-surfaced, tough and weather-resistant UV-stabilized polymeric film. The prism surfaces are coated with a vacuum deposition of aluminum to provide a mirror surface to the prism facets. The resulting tape is not more than 0.008 inch thick and comes with an aggressive high-tack pressure-sensitive adhesive. Durability up to seven-year warranty. Withstands brushing off dirt and grime, and high pressure washing. Polyester based film resists cracking & lifting. Will retain reflectivity even after impact against loading dock or abrasion by chains Unique, single-ply construction ensures impact & abrasion resistance and easy application 0.008 inch thickness resists dirt accumulation typical of competitor's thicker (0.025 inch), open-cell construction. Material is extremely thin so there are no raised edges that can catch and tear Unlike competing conspicuity materials, Reflexite® conspicuity material features 100% adhesion, with no grid lines that can fill with water and cause premature adhesive failure Super-high brightness & wide angularity; Typically 1000 candlepower with tremendous long sight distance performance; reflects at all applicable angles on the roadway Reflexite® Visibly Better™ retroreflective conspicuity material is a tough weather and solvent resistant product designed for rugged outdoor use on the sides and rear of trucks, trailers, automobiles, and emergency vehicles to enhance safety on the roadway by improving their visibility. NOTE: NHTSA conspicuity regulations (effective 12/1/93) mandate that all new trailers - 10,000 lbs GVW and 80 inch wide or larger, must be reflectorized with alternative red & white retroreflective sheeting on the sides, bottom of rear door, and ICC bar; and two pieces of white sheeting on the upper corners of the rear. Application temperature: minimum 50°F.

Printable Page

Email This Page

Save To Favorites

Results per Page :


Results 1 - 9 of 9		1

Item #	Width - Inch	Tape Length - yard / (feet)

REF-DOT-C2-11/7-3-50 yards	2	50 / (150)

REF-DOT-C2-11/7-7-50 yards	2	50 / (150)

REF-DOT-C2-11/7-3KC-50 yards	2	50 / (150)

REF-DOT-C2-11/7-7KC-50 yards	2	50 / (150)

REF-DOT-C2-6/6-3KC-50 yards	2	50 / (150)

REF-DOT-C2-6/6-7KC-50 yards	2	50 / (150)

REF-3-DOT-C2-2-50 yards	2	50 / (150)

REF-7-DOT-C2-2-50 yards	2	50 / (150)

REF-7-DOT-KC-C2-2-50 yards	2	50 / (150)


Results 1 - 9 of 9	1

ISO 9001: 2000 Certified Company
Kapton®, Tedlar®, and Rulon® are registered trademarks of E.I. DuPont
De Nemours and Company used under license by Tapes & Technical Solutions.

footer end-->

Reflective Tape, REF-DOT-C2-50 yd

Item #

Width - Inch

Tape Length - yard / (feet)