Double Coated Paper Tapes on Tapes & Technical Solutions LLC

1105 Tuckahoe Drive
Nashville, TN 37207
Phone: 615-244-7554
Fax: 615-244-2974


All Categories > Double Coated Tapes > Double Coated Paper Tapes


	Double Coated Paper Tapes
	Click on a Product to view details.


		Double Coated Crepe Paper Tapes, DC-2306-36 yards (11) Crepe paper 6.0 (9.2 mil with liner). 3.5 mil high quality saturated crepe paper coated on both sides with a medium tack, high shear synthetic hot melt rubber based adhesive. White siliconized paper release liner. Good adhesion to a variety of surfaces with excellent repositionability characteristics. Suitable for general purpose bonding applications. Special adhesive formulation makes this tape excellent for holding wood cuts and dies with little to no residue upon removal. Can be used for mounting golf club grip handles. General purpose bonding of papers, films, fabrics, etc. Adhesion: 80 oz/in. Holding power: 4000 minutes. Tack ( in.): 1.5. Tensile strength: 16 lbs/in. Elongation: 5% at break. Application temperature: 60 ...




		Double Coated Flatback Paper Tapes, DC-2307-36 yards (11) Flatback paper 7.0 mil (12 mil with liner). Flatback paper coated on both sides with a high shear/aggressive solvent based natural rubber resin adhesive system that bonds well to almost any surface. White crepe paper liner allows for both automatic and hand dispensing applications. Adhesion: 52 oz/in. Quick stick: 20 oz/in. Unwind: 11 oz/in. Tensile strength: 34 lbs/in. Elongation: 3%. Conforms well to rough and irregular surfaces. Excellent for installation of golf club grips. Mil spec.: A-A-180B, Type ll, Class A (Replaces UU-T-91). 3 neutral core/carton.




		Double Coated Crepe Paper Tapes, DC-2308-36 yards (11) Crepe paper 7.0 mil (10.2 mil with liner). 5 mil high quality saturated crepe paper, coated on both sides with a high tack, high shear synthetic hot melt rubber based adhesive. Tape is wound on a 3.2 mil super calendared, white siliconized paper release liner. Used for core start-ups, splicing, holding, joining, attaching, mounting and laminating where high shear and high tack are required. Good tack on irregular surfaces. Works well in holding wood cuts and dies. Suitable for mounting rubber or plastic printing plates. Adhesion: 100 oz/in. Holding power: 10,000 minutes. Tack (in.): 1 Tensile strength: 21 lbs/in. width. Elongation: 7% at break. Application temperature: 60°F to 120°F. Temperature range: -5°F to ...




		Double Coated Paper Tapes, DC-4309LW-36 yards (10) Paper 3.5 (0.09mm) exclusive of liner. 1.5 mil (0.35mm) White paper coated on both sides with a very high tack modified water based acrylic adhesive; white siliconized paper liner. Adheres to nearly all materials, even to difficult surfaces like foams and PE films. Very good temperature, UV aging & water vapor resistance. Hand tearable. Used for general purpose splicing, mounting, bonding, holding nameplates & laminating. Adhesion (1 hr. dwell): 60 oz/in. Tensile strength: 1 lb/in. Elongation: 5%. Temperature resistance: -40°F to +212°F continuous (up to +300°F short term). 3 inch neutral core/carton.




		Double Coated Paper Tapes, DC-4317VS-36 yards (10) Paper 6.7 mil (0.17mm) exclusive of liner. 4 mil white paper coated on both sides with an aggressive modified water based acrylic adhesive. Gold siliconized paper liner. Good direct & durable adhesive strength on most surfaces. Good dynamic & static shear strength. No plasticizer migration on most surfaces. Good watervapor, temperature, UV and aging resistance. Moderate resistance to chemicals (should be tested). Excellent corrugated splicing tape. Also used for other holding, joining, attaching and laminating applications. Adhesion (1 hr. dwell): 102 oz/in. Tensile: 4 lbs/in. Elongation: 5%. Temperature resistance: -40°F to +250°F continuous (up to +390°F short term). 3 inch neutral core/carton.




		Double Coated Tissue Tapes, DC-4208PF-55 yards (9) Tissue 3.9 mil (0.10mm) exclusive of liner. 0.5 mil non-woven tissue coated on both sides with a highly cured modified solvent free pure acrylic water based adhesive. Wound on a 50# gold siliconized paper release liner.Good direct and durable adhesive strength, good dynamic and static shear resistance with no plasticizer migration on most surfaces. Good water/water-vapor, temperature, UV and aging resistance. Excellent adhesion to foams in various applications. Good initial adhesion and good temperature resistance. Moderate resistance to chemicals(should be tested). Excellent corrugators' splicing tape; heavy paper and film splicing. APEO/APE Free. Adhesion (1 hr. dwell): 65 ...




		Double Coated Tissue Tapes, DC-4208PF-110 yards (8) Tissue 3.9 mil (0.10mm) exclusive of liner. 0.5 mil non-woven tissue coated on both sides with a highly cured modified solvent free pure acrylic water based adhesive. Wound on a 50# gold siliconized paper release liner. Good direct & durable adhesive strength, good dynamic & static shear resistance with no plasticizer migration on most surfaces. Good water/water-vapor, temperature, UV and aging resistance. Excellent adhesion and good temperature resistance. Moderate resistance to chemicals (should be tested). Excellent corrugators' splicing tape; heavy paper and film splicing. APEO/Ape Free. Adhesion (1 hr. dwell) 65 oz/in. Shear resistance: 22 Ibs/in2. Temperature resistance ...




		Double Coated Tissue Tapes, DC-4210RS-110 yards (8) Tissue 3.9 mil (0.10mm) exclusive of liner. 0.5 mil white, non-woven tissue coated on both sides with a modified, water based acrylic adhesive, wound on a siliconized gold glassine 50 lb. release liner. It exhibits good permanent adhesive strength as well as good static and dynamic shear properties on mot surfaces, even when heat is applied. No plasticizer migration on most surfaces. Excellent corrugators' splicing tape. Made specifically for corrugated, heavy paper and film splicing; but can also be used for general holding, joining, attaching, and laminating applications. Adhesion (1 hr. dwell): 45 oz/in. Elevated temperature shear test: > 392°F. Dynamic shear: 48 lb/in2. Temperature range: -40°F to -392°F. 3 inch ...




		Double Coated Tissue Tapes, DC-4210RS-55 yards (9) Tissue 3.9 mil (0.10mm) exclusive of liner. 0.5 mil white, non-woven tissue coated on both sides with a modified, solvent free water based acrylic adhesive. Gold siliconized paper liner. Adhesion (1 hr. dwell) 36 oz/in. Shear resistance: 48 Ibs/in2. Temperature resistance -40°F to +392°F. It exhibits good permanent adhesive strength as well a goo static and dynamic shear properties on most surfaces, even when heat is applied. No plasticizer migration on most surfaces. Excellen corrugators' splicing tape. Made specifically for corrugated, heavy paper and film splicing; but can also be used for general holding, joining, attaching, and laminating applications. 3 inch neutral core/carton.




		Double Coated Tissue Tapes, DC-4215WO-36 yards (8) Tissue 5.9 mil (0.15mm) exclusive of liner. 0.5 mil non-woven tissue coated on both sides with an aggressive, modified water basic acrylic adhesive, wound on a 50# siliconized gold glassine release liner. Provides a strong durable bond with good dynamic and static shear strength on most surfaces. Excellent adhesion to non-polar PE films and foams which are difficult surfaces to splice or laminate. Very resistant to humidity and weather when bonded. Very good temperature, UV, and aging resistance; however, tape exhibits moderate resistance against solvents. Superior conformability to irregular surfaces due to its heavy adhesive coat weight. Designed for heavy-duty splicing and permanent holding with excellent performance on smooth or rough ...




		Double Coated Tissue Tapes, DC-4215WO-60 yards (8) Tissue 5.9 mil (0.15mm) exclusive of liner. 0.5 mil non-woven tissue coated on both sides with an aggressive, modified water basic acrylic adhesive, wound on a 50# siliconized gold glassine release liner. Provides a strong durable bond with good dynamic and static shear strength on most surfaces. Excellent adhesion to non-polar PE films and foams which are difficult surfaces to splice or laminate. Very resistant to humidity and weather when bonded. Very good temperature, UV, and aging resistance; however, tape exhibits moderate resistance against solvents. Superior conformability to irregular surfaces due to its heavy adhesive coat weight. Designed for heavy-duty splicing and permanent holding with excellent performance on smooth or rough ...




		Double Coated Tissue Tapes, DC-1210-60 yards (9) Tissue 4.0 mil. exclusive of liner. 1.8 mil tissue substrate, coated on both sides with an aggressive synthetic hot melt rubber adhesive. Gold siliconized paper liner. Excellent quick stick & peel strength. Good for flying splice or static splicing where high resistance to heat is not required. Excellent for nameplates, trophies, core start-ups; laminateing cork, cloth or felt; splicing papers, textiles, plastics. Adhesion: 90 oz/in. Tensile: 5.7 Ibs/in. Temperature resistance: 60°F to 140°F application; -0°F to 180°F operating. 3 inch neutral core/carton.




		Double Coated Tissue Tapes, DC-3210SA-55 yards (9) Tissue 4.4 mil. exclusive of liner. 1.2 mil white, non woven tissue carrier coated on both sides with a solvent bases acrylic adhesive, wound on a siliconized 90 gr. gold glassine paper release liner. It exhibits good permanent adhesive strength as well as good static and dynamic shear properties on most surfaces, even when heat is applied. No plasticizer migration on most surfaces, even when heat is applied. No plasticizer migration on most surfaces. Perfect for splicing of plastic film, paper and foil of indutrial grade. Excellent corrugators' splicing tape. Can also be used for general holding, joining, attaching, and laminating applications. Temperature resistance: 24 hours at 176°F. Short term ...




		Double Coated Tissue Tapes, DC-3210SA-110 yards (7) Tissue 4.4 mil. exclusive of liner. 1.2 mil white, non woven tissue carrier coated on both sides with a solvent based acrylic adhesive, wound on a siliconized 90 gr. gold glassine paper release liner. It exhibits good permanent adhesive strength as well as good static and dynamic shear properties on most surfaces, even when heat is applied. No plasticizer migration on most surfaces. Perfect for splicing of plastic film, paper and foil of industrial grade. Excellent corrugators' splicing tape. Can be used for general holding, joining, attaching, and laminating applications. Temperature resistance: 24 hours at 176°F. Short term range: -4 to +248°F. Peel Adhesion: 74 oz/in. 3 ...

ISO 9001: 2000 Certified Company
Kapton®, Tedlar®, and Rulon® are registered trademarks of E.I. DuPont
De Nemours and Company used under license by Tapes & Technical Solutions.

footer end-->