(4) NOPI 4090 (4224); 4091 (4287) Tensilized polypropylene strapping. 2.7 mil (0.07mm). 95# Tensile. Rubber resin adhesive. Adhesion to steel: 47 oz/inch. Elongation: 35%. Good initial tack and high shear resistance. Properly applied tape shrinks around loads and holds them tight. Impact strength allows give and take without snapping. Used for palletizing & unitizing corrugated and paper board boxes. 3 inch core.
Heavy-duty tensilized polypropylene. 4.0 mil (0.103mm). 140# Tensile. Rubber resin adhesive. Adhesion to steel: 47 oz/inch. Elongation: 35%. Good initial tack and high shear resistance. Properly applied tape shrinks around loads and holds them tight. Impact strength allows give and take without snapping. Economical alternative to filament tape for palletizing, bundling, and unitizing corrugated and paper board boxes. 3 inch core.
(4) Heavy-duty tensilized polypropylene. 4.0 mil (0.103mm). 140# Tensile. Rubber resin adhesive. Adhesion to steel: 47 oz/inch. Elongation: 35%. Good initial tack and high shear resistance. Properly applied tape shrinks around loads and holds them tight. Impact strength allows give and take without snapping. Economical alternative to filament tape for palletizing, bundling, and unitizing corrugated and paper board boxes. 3 inch core.
(3) Heavy-duty tensilized polypropylene. 4.5 mil (0.113mm). 155# Tensile. Rubber resin adhesive. Adhesion to steel: 70 oz/inch. Elongation: 35%. High tensile strength combined with a high tack adhesive makes this tape an excellent alternative to many filament reinforced strapping tapes. Used for palletizing, bundling, end tabbing and holding. 3 inch core.
Heavy-duty tensilized polypropylene. 4.5 mil (0.113mm). 155# Tensile. Rubber resin adhesive. Adhesion to steel: 70 oz/inch. Elongation: 35%. High tensile strength combined with a high tack adhesive makes this tape an excellent alternative to many filament reinforced strapping tapes. Used for palletizing, bundling, end tabbing and holding. 3 inch core.
(4) Appliance tape. Non-staining & residue free. 4.6 mil (0.116mm). 163# Tensile. Rubber based adhesive. Adhesion to steel: 61 oz/inch. Elongation: 35%. Specially designed to be stain and adhesive transfer resistant. Features extra high tack, high adhesion and chemical resistance; water-proof and non-toxic. Used for closing, holding, and securing appliances, computers, furniture and office equipment; "L" and "C" clipping. 3 inch core.
ISO 9001: 2000 Certified Company Kapton®, Tedlar®, and Rulon® are registered trademarks of E.I. DuPont De Nemours and Company used under license by Tapes & Technical Solutions.